- 2 -
JW-A75GM-USB3
User's Manual
Administrator Password
This option is used to set an administrator password, as the following steps:
1. Move the cursor to the Administrator Password item, press <Enter>.
2. In the "Create New Password" dialog box, enter 3 to 20 characters or numbers to be
setted, press <Enter>, and enter again in the "Confirm Password" dialog box to confirm the
password is correct.
If the password is correct, the system will prompt "Password installed ", the password is set
successfully.
If the prompt" Invalid Password! ", entering the password does not match, please enter it
again.
To clear the system administrator password, select "Administrator Password", in "Enter Current
Password" dialog box enter the old password, and in the "Create New Password "<Enter>
,password is cleared.
User Password
The option be used to set the user password, setting steps is same with "Administrator
Password"
.
4.5.8 JUSTw00t
Aptio Setup Utility - Copyright (C) 2011 American Megatrends,Inc.
Main
Advanced
Chipset
Boot
Security
JUSTw00t
Save & Exit
Over Clock Configuration
CPU Voltage Control
CPU NB Voltage Control
Dram Voltage Control
VDDP Voltage Control
FCH Voltage Control
APU Vcore
Dram Current Voltage
APU Current Voltage
------Platform Frequency-----
CPU Fid Boost
CPU Vid Boost
----Memory Performnce Control
Memory Frequency
Memory Performance Mode
CAS Latency(Tcl)
RAS/CAS Delay(Trcd)
Row Precharge Time(Trp)
Min Active RAS(Tras)
Read to Precharge(Trtp)
Row Cycle(Trc)
Write Recover Time(Twr)
RAS/RAS Delay(Trrd)
Write to Read Delay(tWTR)
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
1.392v
1.504v
1.205v
[Auto]
[Auto]
-----
[Auto]
[Auto]
9
9
9
24
5
34
10
5
5
CPU Voltage Control
→ ←
: Select Screen
↑↓
:
Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10:Save & Exit
ECS:Exit
Version 2.11.1210. (C)Copyright 2011 American Megatrends, Inc.
To set the operating voltage of related devices, such as CPU CPUNB Dram VDDP.
CPU Fid Boost
CPU Boost Frequence.
CPU Vid Boost
