- 22 -
JW-A740GM-D2 User's Manual
►
Onboard Device Configuration
Click <Enter> key to enter its submenu.
BIOS SETUP UTILITY
Advanced
Onboard Devices Configuration
Disabled:disablea the
intergrate IDE Controller
PRIMARY:enables only the
Primary IDE Controller.
SECONDARY:enables ony the
Secondary IDE Controller.
BOTH:enables both IDE
Controllers
←
Select Screen
↑
↓
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Onboard PCI IDE Cintroller
Hard Disk Write Protect
IDE Detect Time Out(Set)
ATA(PI) 80Pin Cable Detection
Onboard Floppy Controller
Serial Port1 Address
Parallel Port Address
Onboard Lan Controller
Onboard Lan BootROM Control
►
USB Device
[Both]
[Disabled]
[35]
[Host & Device]
[Enabled]
[3F8/IRQ4]
[378]
[Enabled]
[Disabled]
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
•
Onboard PCI IDE Controller
This option allows you to Select PCI IDE training mode
•
Hard disk write protect
Disable/enable device write protection.this will be effictive only if device is accessed through
BIOS
•
IDE Detect Time Out
Select the time out value for detecting ATA/ATAPI device(s)
•
ATA(PI) 80Pin Cable Detection
Select the mechanism for detecting 88pin ATA(PI) Cable.
•
Onboard Floppy Controller
Allows BIOS to Enable or Disable FLOPPY Controller
•
Serial Port1 Address
Allows BIOS to Select Serial Port1 base Addresses.
•
Parallel Port Address
Allows BIOS to Parallel Port base Addresses.
•
Onboard
Lan Controlle
r
Enable:turn on the lan Disabled:shut the lan
•
Onboard Lan Boot ROM
Available options:Disabled, Enabled
