JANDS DD-8 DMX SPLITTER
Revision 2.0 - 5 July 1998
OPERATING MANUAL
- 5 -
2.0
Equipment Description
2.1
Physical layout
1. DMX Input: A standard 5 pin male AXR connector for DMX-512 signal input.
2. DMX LED: This indicator shows the presence of DMX signal.
3. Power LED: This indicator shows when mains power is applied to the DD-8.
4. DMX Outputs: A standard 5 pin AXR connector outputs opto-isolated DMX-512
signal to the DMX-512 receivers. The same signal appears on all eight outputs.
5. Power input: An IEC type inlet socket connects mains power to the DD-8.
6. Fuse: The position of the fuse holder selects the mains input voltage. Refer to Section
3 for details on setting the correct mains input voltage.
FRONT PANEL
BACK PANEL
1
2
3
4
5
6
