TROUBLESHOOTING
ROTISSERIE
ROTISSERIE NOT TURNING
Is the Motor Running?
ROTISSERIE MOTION IS NOT SMOOTH
reset. Then check the motor overload contact assembly. This is located inside a gray
electrical enclosure near the motor. Push the red and blue buttons simultaneously to
reset the motor. If the motor still does not turn, call a service technician to
troubleshoot the wiring
, the
motor
, the overload, and the mechanical condition of the
sprockets, shafts, and spit bolts
.
YES – Then check the chain connection between the motor sprocket and the
sprocket on the
lowest
rotisserie shaft. If the chain is broken, then either repair the
chain (usually with a master link) or replace the chain. If the chain is okay, then
check the connect
ions
between the
sprocket
s
and the shaft
s
. The sprocket
s are
secured to the shaft
s
with a key and a keyway with a set screw.
NO – Check the electrical supply panel for a tripped circuit breaker. If tripped, then
As in the above step, troubleshoot the mechanical condition of the
sprockets, shafts, and spit bolts. Look for one or more seized spit bolts
and/or damaged sprocket teeth.
Unit shown has three spit rows (your unit may have only two).
6