J&M TF2, Operator'S Manual

Page: 9 / 33

9
Set-Up Instruction
The J&M Torsion-Flex Soil Conditioner is shipped with components partially assembled. Hardware required to connect the Base Wheel
Assembly, Main Base Frame Assembly, Wing Frames and Tongue Assembly should already be secured to the components at the point of
attachment.
The hydraulic cylinders have the fittings already installed and are secured to the base wheel assembly. The hydraulic hoses and light harness
wires should be inserted into the component tubing and simply require the ends to be connected.
Each basket frame should have the rolling baskets and torsion flex arm installed. Refer to the Basket Size and Layout, located on the right
side of the chart on page 5 of the Operator’s Manual for recommended basket layout. Be sure the baskets with the 3” x 3” Torsion Bars are
secure to the Main Base Unit and the baskets with the smaller 2 1/2” x 2 1/2” Torsion Bars are secured to the side wings.
Tongue Assembly
Base Wheel Assembly Optional Lift Assist
Wheel Assembly
Optional Lift Assist
Wheel Assembly
Base Wheel Assembly
Right Wing Frame
Left Wing Frame
Main Base Frame
Wing Unit Baskets
2-1/2” x 2-1/2” Torsion Arm
Wing Unit Baskets
2-1/2” x 2-1/2” Torsion Arm
Base Unit Baskets
3” x 3” Torsion Arm