J&M TF2 Operator'S Manual Download Page 3

3

General Information

To The Dealer

Read manual instructions and safety rules.  Make sure all items on the Dealer’s Pre-Delivery and Delivery Check Lists are completed 

before releasing equipment to the owner.

The dealer must complete the Warranty Registration found on the Dealer Portal website located at dealer.jm-inc.com and return 

it to J. & M. Mfg. Co., Inc. at the address indicated on the form. Warranty claims will be denied if the Warranty Registration has not been 

submitted.

EXPRESS WARRANTY:

J. & M. Mfg. Co. Inc. warrants against defects in construction or materials for a period of ONE year.  We reserve the right to inspect 

and decide whether material or construction was faulty or whether abuse or accident voids our guarantee.
Warranty service must be performed by a dealer or service center authorized by J. & M. Mfg. Co., Inc. to sell and/or service the type 

of product involved, which will use only new or remanufactured parts or components furnished by J. & M. Mfg. Co., Inc.  Warranty 

service will be performed without charge to the purchaser for parts or labor based on the Warranty Labor Times schedule.  Under no 

circumstance will allowable labor times extend beyond the maximum hours indicated in the Warranty Labor Times schedule for each 

warranty procedure.  The purchaser will be responsible, however, for any service call and/or transportation of the product to and 

from the dealer or service center’s place of business, for any premium charged for overtime labor requested by the purchaser, and 

for any service and/or maintenance not directly related to any defect covered under the warranty.  Costs associated with equipment 

rental, product down time, or product disposal are not warrantable and will not be accepted under any circumstance.
Each warranty term begins on the date of product delivery to the purchaser.  Under no circumstance will warranty be approved 

unless (i) the product warranty registration card has been properly completed and submitted to the equipment manufacturer, and 

(ii) a warranty authorization number has been issued by the equipment manufacturer.  This Warranty is effective only if the warranty 

registration card is returned within 30 days of purchase.
This warranty does not cover a component which fails, malfunctions, or is damaged as a result of (i) improper modification or 

repair, (ii) accident, abuse or improper use, (iii) improper or insufficient maintenance, or (iv) normal wear or tear.  This warranty 

does not cover products that are previously owned and extends solely to the original purchaser of the product.  Should the original 

purchaser sell or otherwise transfer this product to a third party, this implied, with respect to tires or other parts or accessories not 

manufactured by J. & M. Mfg. Co., Inc.  Warranties for these items, if any, are provided separately by their respective manufacturers.
THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES OR CONDITIONS, EXPRESS, IMPLIED OR STATUTORY, INCLUDING 

ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE.
In no event shall J. & M. Mfg. Co., Inc. be liable for special, direct, incidental or consequential damages of any kind.  The exclusive 

remedy under this Warranty shall be repair or replacement of the defective component at J. & M. Mfg. Co., Inc’s. option.  This is the 

entire agreement between J. & M. Mfg. Co., Inc. and the Owner about warranty and no J. & M. Mfg. Co., Inc. employee or dealer is 

authorized to make any additional warranty on behalf of J. & M. Mfg. Co., Inc.
The manufacturer reserves the right to make product design and material changes at any time without notice.  They shall not incur 

any obligation or liability to incorporate such changes and improvements in products previously sold to any customer, nor shall 

they be obligated or liable for the replacement of previously sold products with products or parts incorporating such changes.

SERVICE:

The equipment you have purchased has been carefully manufactured to provide dependable and satisfactory use.  Like all 

mechanical products, it will require cleaning and maintenance.  Lubricate the unit as specified.  Observe all safety information in 

this manual and safety signs on the equipment.
For service, your authorized J. & M. dealer has trained mechanics, genuine J. & M. service parts, and the necessary tools and 

equipment to handle all your needs.
Use only genuine J. & M. service parts.  Substitute parts may void warranty and may not meet standards required for safe and 

satisfactory operation.  Record the model number and serial number of your equipment in the spaces provided:

Model No:

______________     

Serial No:

 ________________________       

Date of Purchase:

 ___________________

Purchased From:

 ________________________________________________________________________________

Provide this information to your dealer to obtain correct repair parts.

Summary of Contents for TF2


































Reviews: