4. Installation Instructions
Integration component terminal Installation and connections
➢
Diagram A and B
1. Remove:
Outer Fairing Shell
Installing the Integration terminal
(BAT-WING STYLE FAIRING)
1a. Mount the provided mounting bracket to the right side of
the inner fairing in the position shown using the two- sided tape
already affixed to the bracket.
Diagram A
1b. Then mount the JMDM-IPBT-HDDR integration terminal to the
bracket as shown using the supplied Velcro, and secure in this
position with the additional tie straps provided around the wire
bundles.
Diagram B
Installing the Integration terminal
(ROAD-GLIDE FAIRING)
2. Mount the JMDM-IPBT-HDDR integration terminal directly to
the left side of the inner fairing in the position shown using the
sup- plied Velcro, and secure in this position with the additional tie
straps provided around the wire bundles.
Diagram C
Note:
The mounting bracket is not used for the Road-Glide
application.
3. Connect the red wire from the JMDM-IPBT-HDRR to the orange/
white wire from the headlight wiring and connect the black wire to
the black wire from the headlight wiring harness.
4. Connect the 3.5mm stereo plug to the auxiliary input port on the
front of the Harley radio.
5. Connect the iPod cable if using an iPod/iPhone to the JMDM-
IPBT-HDDR and route cable to the mounting area of the iPod/
iPhone.
6. If using Auxiliary cable connect the cable to the JMDM-IPBT-
HDDR and route to a convenient location.
Important Note: This Bluetooth/digital music controller is NOT
waterproof, so care must be taken to mount the unit inside the
fairing so that significant amounts of water will not splash down
on to the unit from the gaps between the windshield and the top
of the fairing, with iPod cable jack plug oriented to the down-
ward position.
5. General Operation Instructions
General tips for use with iPod
When connection is made to the iPod the iPod will begin charging.
The iPod will begin to play songs or playlists depending on what
has been selected on the iPod.
Diagram A
Diagram B
Diagram C
mounting
bracket
