background image

1. Product Description

J&M’s new digital music controller will allow you to stream music 

videos down off of You-Tube with your favorite Smartphone, and 

direct by Bluetooth the audio signals into the factory Harley HK 

radio.
You can also stream stereo music down off of Pandora and/or 

your SmartPhone’s own internal music files, and direct them by 

Bluetooth into the Harley audio system.
These exciting music streaming features will work with an iPhone, 

Android, Blackberry, Samsung NOTE or almost any Smartphone 

available in the marketplace today that incorporates Bluetooth as 

part of its design.
This new digital music controller will also connect to a standard 

iPod by wire and direct the stereo music into the Harley audio 

system aux input, using the iPod’s own onscreen controls, while at 

the same time keeping the iPod fully charged.
J&M’s technicians have configured the input signal levels from 

the new controller, to the Harley radio, so that the system volume 

levels available on the highway and overall sound quality thru the 

entire system, are significantly better than what is available when 

using Harley’s own iPod adapter, XM satellite radio module OR 

built-in FM stereo.
The Harley radio control menu selections of bass, treble, front/ 

rear fader, auto volume control, driver/passenger intercom, bike- 

to-bike CB radio and handlebar volume control, (if activated) all 

remain unchanged when using J&M’s Bluetooth digital music con-

troller.
When mounted on a Harley Ultra with the optional J&M micro-

phone signal integration component, and linked by Bluetooth to a 

cell phone, the driver can actually talk on the phone thru his or her 

J&M or Harley brand helmet headset, without affecting the driver/

passenger intercom or CB functions of the audio system (phone 

calls are accepted or initiated onscreen from the phone itself).

Supported Bluetooth Profiles

A2DP (Advanced Audio Distribution Profile) 

HFP (Hands-free Profile) 

HSP (Headset Profile) 

AVRCP ( Audio Video Remote Control Profile)

2. Safety and General Information

IMPORTANT INFORMATION FOR SAFE AND EFFICIENT 

OPERATION. READ THIS INFORMATION BEFORE USING YOUR 

DEVICE.

Users are not permitted to make changes or modify the device in 

any way. Changes or modifications not expressly approved by the 

party responsible for compliance could void the user’s authority to 

operate the equipment. See 47 CFR Sec. 15.21.
This device complies with part 15 of the FCC Rules. Operation is 

subject to the following two conditions: (1) This device may not 

cause harmful interference, and (2) this device must accept any 

interference received, including interference that may cause unde-

sired operation. See FCC 47 CFR Sec. 15.19 (3).

ELECTROMAGNETIC INTERFERENCE/COMPATIBILITY

Note: Nearly every electronic device is susceptible to electro-

magnetic interference (EMI) if inadequately shielded, designed or 

otherwise configured for electromagnetic compatibility.

FACILITIES:

 To avoid electromagnetic interference and/or com-

patibility conflicts, turn off your device in any facility where posted 

notices instruct you to do so. Hospitals or health care facilities 

may be using equipment that is sensitive to external RF energy.

AIRCRAFT:

 When instructed to do so, turn off your device when 

on board an aircraft. Any use of a device must be in accordance 

with applicable regulations per airline crew instructions.

MEDICAL DEVICES
HEARING AIDS

: Some devices may interfere with some hearing 

aids. In the event of such interference, you may want to consult 

with your hearing aid manufacturer to discuss alternatives.

OTHER MEDICAL DEVICES

If you use any other personal medical device, consult the manu-

facturer of the device to determine if it is adequately shielded 

from RF energy. Your physician may be able to assist you in 

obtaining this information.

Industry Canada Notice to Users:

 Operation is subject to the fol-

lowing two conditions: (1) This device may not cause interference 

and (2) This device must accept any interference, including inter-

ference that may cause undesired operation of the device.

FCC Notice to Users:

 This equipment has been tested and found 

to comply with the limits for a Class B digital device, pursuant to 

part 15 of the FCC Rules. These limits are designed to provide 

reasonable protection against harmful interference in a residen-

tial installation. This equipment generates uses and can radiate 

radio frequency energy and, if not installed and used in accor-

dance with the instructions, may cause harmful interference to 

radio communications. However, there is no guarantee that inter-

ference will not occur in a particular installation. If this equipment 

does cause harmful interference to radio or television reception, 

which can be determined by turning the equipment off and on, 

the user is encouraged to try to correct the interference by one or 

more of the following measures:

• Reorient or relocate the receiving antenna. 
• Increase the separation between the equipment and  

 

the receiver. 

• Connect the equipment to an outlet on a circuit different  

 

from that to which the receiver is connected. 

• Consult the dealer or an experienced radio/TV technician  

 

for help. 

3. Package Contents

• Digital music controller
• iPod connection cable
• Auxiliary extension cable
• Velcro strips for mounting

Product Description 

Section 1

Safety & General Information 

Section 2

Package Contents 

Section 3

Installation Instructions 

Section 4

General Operation Instructions 

Section 5

Bluetooth Linking/Pairing Scenarios 

Section 6

Table of Contents

Summary of Contents for JMDM-IPBT-HDDR






Reviews: