Fig. J
ESPA-5000
Full Range Class G Amplifier
Output Power (RMS) @ 1% 1000Hz 14.4V CEA 2006
Stereo @ 4ohms
4 x 75 watts @ 13 amps Eff 71%
Stereo @ 2ohms
4 x 125 watts @ 23 amps Eff 66%
Frequency Response -3dB
1Hz - 69kHz
S/NRatio
Separation
>90dB
>74dB
Input Sensitivity
.35V - 3.9V
Input Impedance
47.5K
Specifications
Thank you for the confidence you have shown in J&M Corporation by
purchasing one of our innovative products.
If you have any question or comments about this product, you may
contact us at USA 1-520-624-7000 Monday thru Friday, 8:00AM
thru 5:00PM Mountain Standard Time.
1415 S. Cherry Avenue
Tucson, AZ 85713 U.S.A.
Tel (800) 358-0881
Website: http://www.jmcorp.com
E-mail: [email protected]
Fig. I
FOR MODELS WITH A CB AND/OR SAT RADIO, CONTINUE
WITH STEPS (14) THRU (16), FOR BIKES WITHOUT A CB OR
SAT RADIO, PROCEED TO STEP (17).
14. Install the previously removed CB and/or SAT Radio
modules into the J&M lower mounting bracket and secure using
the (2) 8-32x1/4 screws provided. (these are the longer of the
remaining screws)
(Figure I)
15. Position the lower bracket assembly below the factory radio
and secure using the (4) remaining 8-32x3/16 screws provided.
(Figure J)
(Remove and re-secure any factory wiring attached
to the bottom of the radio using the tie-straps provided)
16. Re-connect the CB and/or SAT Radio harness and antenna
connectors.
17. Test the system for proper operation before reassembling
the fairing, realizing that full sound quality and fidelity will not
be heard until the outer fairing shell is completely reinstalled.
Note: To activate the front/rear fader feature of your
Harley HK radio, ask your dealer to reflash the audio
system for front/rear fade.
