Handlebar
multifunction
switch assembly
8-pin
plugs
Motorcycle’s
ACC power
plug
Red
3-pin plug
Driver's
helmet headset
(not included)
CMXB-GL18
Radar connection
harness
Black
3-pin plug
Radar Detector
J&M Plug-and-Play Radar
Detector Connection Harness
(Not Included)
CFBR-GL1800
Red 6-pin
plugs
Factory driver’s headset
extension lead
Red 6-pin
plugs
Factory driver’s
headset harness
under fairing pocket
Diagram B
Operation of the CFBR-GL1800 with a Stereo
Bluetooth music capable cell phone.
1. After successfully pairing your cell phone with the J&M CFBR-
GL1800, activate the Bluetooth music function of your cell phone.
2. Using the volume control on the phone adjust the music volume
to maximum. Make further volume adjustments using the handle-
bar mounted volume control.
Operation of the CFBR-GL1800 with a Bluetooth
Enabled GPS.
1. Both music and Cell Phone can be streamed to the CFBR-
GL1800 from a Bluetooth Enabled GPS.
2.The Cell Phone is paired to the GPS and the Cell Phone functions
will be controlled by the GPS or the phone itself. (to answer, reject
or dial a call). Note: The Multifunction Button will not control the
Cell Phone in this configuration.
3.To end a call the GPS can be used or simply wait for the caller to
hang up.
4. The music from the GPS, if initiated, will resume when the call
has ended.
5. The GPS music volume should be adjusted as described above
in “Operation of the CFBR-GL1800 with a Stereo Bluetooth capable
Cell Phone” using the volume controls on the GPS.
Note:
For simultaneous use of a Cell/Smart Phone and GPS with
the CFBR-GL1800 you must pair the GPS to the CFBR-GL1800 and
the Cell/Smart Phone to the GPS.
