Thank you for the confidence you have shown in J&M
Corporation by purchasing one of our innovative products.
If you have any question or comments about this product,
you may contact us at USA 1-520-624-7000 Monday thru
Friday, 8:00AM thru 5:00PM Mountain Standard Time.
1415 S. Cherry Avenue
Tucson, AZ 85713 U.S.A.
Tel (800) 358-0881
Website: http://www.jmcorp.com
E-mail: [email protected]
When the passenger is finished talking, they can simply wait for the other
party to hang up or they can terminate the call with a single press on the
headset’s multifunction button.
With the Passenger’s headset, all cell phone call volume adjustments are
made on the headset itself with the vol-up (+) and vol-down (-) buttons dur-
ing actual cell phone conversations and the headset will remember these
volume settings for subsequent cell phone conversations.
How to Use Rider-to-Passenger Intercom
Once the Rider and Passenger headsets have been linked together for “pri-
vate” helmet-to-helmet communications, either can activate or terminate
the intercom function with a single press on the intercom button on either
headset.
When in helmet-to-helmet intercom mode, intercom volume adjustments
are made on the headsets themselves with the vol-up (+) and vol-down (-)
buttons only.
These intercom volume adjustment settings will be remembered by each
headsets so there will be no need to “fiddle” with them each time the
helmet-to-helmet intercom function is activated.
How To Use 40-CH CB Radio
After starting the bike and music is playing into the Rider and Passenger
headsets, lower the CB squelch setting to level 1 and confirm that the CB
background static noise is heard in the headset.
Then adjust the headset volume to maximum FIRST with the (up)
button on the headset itself, then all subsequent CB radio volume adjust-
ments are to be made using the handlebar volume control. (For the dura-
tion of that ride sequence)
Then turn the CB squelch control back up to about level 8, or however high
is necessary to remove the background CB static, at which time the music
will return to both the Rider and Passenger headsets.
If the Rider or Passenger wish to talk over the CB radio, simply depress
either the handlebar mounted CB PTT switch or activate CB TX from the
passenger controls, if your Wing is so equipped.
