8-3
Falcon 2015
Service Manual
Specifi cations subject to change without notice | Check our website for valuable information including videos, workshop and operations manuals. www.jjamusements.com
To inspect/change the brake shoes, you must fi rst
remove the right rear wheel and the axle sleeve.
Slide brake drum away to access the brake shoes.
The brake lining thickness service limit is 2.0mm
(.008”): If either lining is worn beyond the service
limit, replace both brake shoes.
To remove the shoes, grab both brake shoes as
shown and pull inwards to release the tension from
the retaining springs.
Remove the springs and shoes. Discard worn
shoes and springs.
NOTE: J&J recommends always installing new
springs whenever shoes are removed.
Changing brake shoes
Springs
Springs
