!
WARNING
!
DO NOT
mount the Poly Chiller with the bracket to the side of the fan as
shown. The motor mount and fan mounting bracket are not structurally
designed to support the fan in this orientation. Mounting the Poly Chiller in
any way other than outlined in these installation instructions will void the
fan warranty, and may cause severe injury or even death.
IS230-12H
J&D Manufacturing • 6200 Hwy 12 • Eau Claire, WI 54701 • 1-800-998-2398 • www.jdmfg.com
Page 3 of 4
5
Once the Installation Bracket is secured to your structure, lift and attach
the Poly Chiller to the Installation Bracket by inserting the (1) 1/2” - 13 x
1-1/2” Hex Bolt through the hole in the Top Hanging Bracket. Secure using
(1) 1/2” - 13 Nylock Nut.
The Hex Bolt should be fully engaged with the Nylock Nut, and the brackets
should fit together tightly.
The top Installation Bracket is not used when mounting the Poly Chiller with
the optional mounting brackets.
To use the optional mounting brackets, complete Step 1 and 2 of the
standard installation. Secure the optional mounting bracket to a post or
wall using hardware (not provided) that is capable of supporting 150 lbs
(68 kgs). Lift and attach the Poly Chiller to the optional mounting bracket
by inserting (1) 1/2” - 13 x 1-1/2” Hex Bolt through the hole in the optional
mounting bracket and through the center hole in the Top Hanging Bracket
as shown. Secure using (1) 1/2” - 13 Nylock Nut. Proceed with Step 6 of
the standard installation instructions to tilt and rotate your fan.
OPTIONAL MOUNTING BRACKETS
6
Now that your Poly Chiller is securely installed to your structure, you may
remove the (1) 3/8” - 16 x 1-1/4” Hex Bolt and (1) 3/8” - 16 Nylock Nut
installed in the top tilt position in each Side Hanging Bracket in Step 1.
Tilt and rotate the fan to the desired position to direct airflow. Reinstall the
Nuts and Bolts in the Side Hanging Brackets to lock the vertical tilt
position. Lock the horizontal rotation of the fan by inserting (1) 3/8” - 16 x
1-1/4” Hex Bolt through one of the additional holes in the Installation
Bracket, and into one of the multi-position holes in the Top Hanging
Bracket. Secure with (1) 3/8” - 16 Nylock Nut.
VRSBRD36C
VRSBRD36C4
VRSBRD36B