XP30 User Manual
13-2
Janam Technologies LLC
•
Display paired device:
When checked, the list of trusted devices will be displayed on top of the list
in gray color. Once the discovery process starts, any newly discovered trusted device will then turn
black. Otherwise, such devices will remain gray.
•
Display last used:
If you check this option, you will be prompted to pick the number of entries to
list, from 1 to 9.
The devices are displayed in the following order during the discovery process:
•
Paired devices (if the option is set)
•
Last used devices (if the option is set) based on the number of entries you picked.
4.
Tap
OK
and the discovery process begins. Devices are displayed as they are discovered.
The screen at right illustrates a discovery phase in process.
The first three devices have been discovered (inquiry phase completed) and
their names have been successfully retrieved (“getting name” phase
completed).
The fourth device is currently at “getting name” phase.
The remaining four devices have only been discovered (inquiry phase
completed) but their name has not been fetched yet (“getting name” phase
not processed yet). Once their name is fetched, it will replace the
“unnamed…” string. Note the option “display address for unnamed” is not
checked because the device type was read at inquiry time, rather than their Bluetooth device address.
The screen at right is an example of a discovery process where the inquiry
phase is in progress (no “getting name” phase yet). The discovery setting
“display address for unnamed” is checked so the Bluetooth address is
displayed for each discovered device.
All devices, including trusted devices within range, are discoverable as
shown. Trusted devices are grouped at the top and indicated with the key
icon. The first device is selected by default. If you select a trusted device
from the Discovery Results list, the device is connected and the process is
complete.
If you select a device that is not trusted, you are given the option to add
the device to the trusted device list. If you choose to add the device, you
must go through passkey exchange (if required). If you choose not to add the device at this time, you
may go through passkey exchange at a later time. When creating a trusted device from “add device” in
the trusted device list, the add trusted device now dialog is not shown.
Set Bluetooth preferences
•
Bluetooth:
Select enable to turn Bluetooth on. Select disable to turn
it off (for example while on an airplane or to conserve the battery).
•
Name:
Your Bluetooth device name is displayed to other Bluetooth
devices during discovery and connection.
The default setting is your HotSync name. Before your first HotSync
operation, the default setting is “Palm OS handheld.”
Tap the name box if you want to change your Bluetooth device name.
The edit device name dialog box will appear. Enter the new name, and
tap OK.
•
Address:
This is the number that is assigned to your Bluetooth
device.