Getting Started
XG3
User Manual
Janam Technologies LLC
2
―
8
Screen Alignment
Initial startup of the XG3 device and/or after a
clean boot
, the
device will launch the on-screen
align screen
instructions.
Aligning the screen calibrates the device’s internal circuitry with its
touch-sensitive screen, optimizing stylus-to-screen detection.
To align the screen:
1.
Tap
the screen when automatically instructed to do so during
initial setup or after a
clean boot
.
2. Follow the on-screen instructions, tapping the screen where
indicated by the crosshair symbol.
Follow the on-screen
instructions. Continue to tap each changing crosshair position
with the stylus until the screen exits the align screen function
and returns automatically to the
Screen Orientation
screen.
If, during use, there is a noticeable decrease in stylus
response accuracy, the unit may be easily recalibrated from
the Start > Settings > System > Screen Icon.
