Removable Memory
IMPORTANT NOTE!
To avoid possible damage to microSD or micro-SIM cards or the HT1 itself, ESD
(electrostatic discharge) precautions are recommended when installing or removing
microSD and/or SIM cards. Before handling, discharge any personal static electric
buildup to a point of discharge other than the device.
microSD Card
About microSD Cards
The HT1 rugged tablet has a microSD flash memory card slot in its battery compartment that is
compatible with SDXC (Secure Digital Extended Capacity) cards with capacities of up to 2TB
(exFAT32 card formatting). Older SD and SDHC cards can also be used. Removable microSD memory
is useful for general file storage, uploading and downloading of user data and more. The use of high-
quality microSD cards supplied by a reputable manufacturer is recommended.
To access the microSD card slot:
Remove the battery compartment cover on the back of the unit by
sliding the four cover locks in the open position, and then gently
pulling the cover up by the two tabs on the left and right of the
cover. Then remove the HT1 battery.
To install the microSD card:
Locate the microSD card slot in the battery compartment (labeled
and highlighted orange). Place a compatible microSD card with its
brand and capacity markings facing you and its smaller edge going
into the card slot. Fully insert the microSD card. DO NOT attempt
to insert the microSD card in any other orientation. Put the battery
back into its compartment and put the battery compartment cover
back on.
To remove the microSD card:
Before removing a microSD card, Go to
Settings
>
Storage
>
Portable storage
. Tap the eject symbol and the card will be
unmounted. Then remove the battery compartment cover, remove
the battery, and gently remove the microSD card.
HT1 Setup
HT1
User Manual
Janam Technologies LLC Version 1, September 2020
HT1 Setup 3—1
HT1 Setup
3
