First complete the electrical connections and then check for correctness.
Be sure you test all connections first, and then follow these steps to install this unit.
1. Make sure the ignition is turned off, and then disconnect the cable from the vehicle
battery's negative (-) terminal.
2. Disconnect the wire harness and the antenna.
3. Remove the detachable panel and decorative
enclosure frame and place on one side.
4.Insert the two brackets into the left and right
sides of the chassis, as shownin the following
figure, and separate the chassis from the sleeve.
5.Insert the installation sleeve into the center
console to be installed, and bend the clip using
a screwdriver. Make sure the locking rod is flush with the mounting sleeve and does not
protrude. 6.Connect cables as shown in the Wiring diagram.
7.Insert the car radio into the mounting sleeve. 8.Install decorative enclosure frame.
This unit can be installed in any dashboard Having
an opening as shown below:
INSTALLATION
PRODUCT FEATURES
WARNINGS & PRECAUTIONS
Installation Procedures
Installation Opening
To Install The Car Radio
LCD: VA-LCD DISPLAY
To avoid risk of serious injury or possble violation of laws,please read thefollowing
thoroughly before installation or connecting.
1.This product is designed specifically for use with 12 volt, negative ground electrical
systems only.
2.Havina the wirina and installation done by exnert.
Be sure to diconnect the cable from the negative battery terminal whileinstalltion.
3.Never set the volume of this product so high that you cannot hear outside traffic and
emerency vehicles.
4.This apparatus shall not be exposed to dripping or splashing, and no object filled with
liquids,shall be placed on the apparatus.
5.Fuses shall be replaced only with the correct type and fuse value,and only when the
apparatus is powered off.
6.To prevent a short circuit,never put or leave any metallic objects(such as coins or
metallic tools)inside the unit.
Bluetooth: Version 5.1
Bluetooth Music: Support
Push to Talk: Support
EQ: 32 band, 8 Preset
Pre-Output: 4CH x 2V
Max Power: 4 x 60W
Radio: Preset 18FM
APP Control: iOS and Android Phone
Charge: Front USB 2A
Audio Format: MP3,WMA,AAC,FLAC,APE
Key Light: Multi Color
PARAMETER
Bracket key
Bracket key
Summary of Contents for JS-315BT
Page 1: ......
