OPERATING INSTRUCTIONS
6
To avoid causing permanent damage:
Never operate the unit without water in the cleaning tank. Never use boiling water.
Open the lid and fill the stainless steel tank with warm water (ideally 45°
- 50°C). Do not exceed the “MAX” marking on the inside of the tank.
Place the item to be cleaned into the water. Ensure any items
with a delicate surface such as glasses/sunglasses lenses are
not touching or rubbing the tank walls or base.
Ensure the item is immerged as fully as possible, ensuring the
water level does not exceed the “MAX” marking.
Close the lid and ensure your hands are dry. Plug the supplied mains
cable into the unit and then into the nearest mains outlet.
Press the ON button to start cleaning. The red operation indicator
will illuminate while the unit is in operation. The built in timer will
automatically turn the cleaner off after 3 minutes.
Note:
During operation the unit will “buzz”, this is normal.
If required, you can press the OFF button at any time to stop or pause
the cleaning process. Press the ON button again to resume cleaning and
continue the countdown. When cleaning has finished, you can press the
ON button again to repeat the process.
When cleaning is finished, unplug the unit from the mains and open the
lid to remove the item. Pour away the water and wipe the stainless steel
tank with a clean dry cloth.
1
2
3
4
5
6
