background image

4

Faulty mains supply systems or excessive mains voltage can lead to electric shocks.

 • 

All power supply or antenna systems connected to the speaker must comply with all applicable laws

    and regulations and be professionally installed by an approved installation company.
 • 

Use only the appropriate power cord to connect the speaker. Do not modify the power cord or its

   plug.

Overvoltage in the power supply system (e.g. due to lightning) can damage or destroy the device and 

power supply unit.

 Safety Precautions

The amplifier carries mains voltage and voltages higher than 35 V AC or DC inside. It has no special pro-

tection against the intrusion of liquids or objects into the system. There is therefore a risk of lethal electric 

shock.
 

• Never touch the speaker with wet hands.

 

• Only use the speaker in a dry place.

 

• The speaker must be protected from liquids of all kinds, small metal objects and foreign substances. 

 

• If the speaker is moved from a cold environment to a warm environment, condensation may form

 

  inside the unit. Wait until the loudspeaker has reached room temperature and is dry before

 

  switching it on.

 

• Unplug the main power cable immediately if there is a foreign object or liquid into the amplifier

   section. 

 

Danger of electric shock

 

Danger of injury or damage

 Caution!

Summary of Contents for M102













Reviews: