James Loudspeaker M102 Owner'S Manual Download Page 3

3

TO THE OWNER

Congratulations on your purchase of one of our highly versatile SoundBar amplifier

products. Please take a moment to review this manual as it will help ensure you many years of 

trouble-free service from your new James Loudspeaker SoundBar amplifier product.

IMPORTANT SAFETY INFORMATION

 Key to the symbols

 

This symbol indicates that the device complies with electrical protection

class 2 and therefore does not require earthing.

 

Devices with this symbol may only be used in a dry indoor environment.

 

The triangle symbol with exclamation mark (without additional comment)

indicates important instructions for commissioning, operation and maintenance

of the device.
The term “Caution!” next to the triangle symbol indicates a medium risk. Failure

to observe this warning may result in property damage.
The term “Danger!” next to the triangle symbol indicates a high risk. Failure to

observe this warning may result in death or personal injury.

 

This symbol indicates that you must read and observe the operating instructions

and the safety and warning notices in order to operate the device.

 

This symbol (triangle with lightning) warns of dangerous voltages inside

the enclosure and of hazards due to electric shock.

 

Equipment marked with this symbol must NOT be disposed of with household

waste. 

Summary of Contents for M102













Reviews: