background image

USB 2.0 to SATA/IDE Combo Adapter User’s Manual

 

Safety Instructions 

Always read the safety instructions carefully 

 

Keep this User’s Manual for future reference 

 

Keep this equipment away from humidity 

 

If any of the following situation arises, get the equipment checked by a service technician: 

• 

The equipment has been exposed to moisture. 

• 

The equipment has been dropped and damaged. 

• 

The equipment has obvious sign of breakage. 

• 

The equipment has not been working well or you cannot get it to work according to the 

User’s Manual. 

 

Copyright Statement

 

No part of this publication may be reproduced in any form by any means without the prior written 

permission. Other trademarks or brand names mentioned herein are trademarks or registered 

trademarks of their respective companies. 

 

Disclaimer 

Information in this document is subject to change without notice. The manufacturer does not make 

any representations or warranties (implied or otherwise) regarding the accuracy and completeness 

of this document and shall in no event be liable for any loss of profit or any commercial damage, 

including but not limited to special, incidental, consequential, or other damage. 

 

September 2005, Rev1.0 

 

i

 

Summary of Contents for 2075815












Reviews: