4
7.
The motor support already has a side pull and drop installed.
Looking from the cockpit the motor rib is showing to the right.
8.
The fuselage rib and fuselage belts are glued.
5.
Insert further ribs and glue together.
!!Adhere to right angle and make sure nothing is displaced!!
6.
The construction is turned. Servo/ battery board and motor sup
-
port are mounted.
9.
The ribs at the rear for the fuselage are inserted into the groove
and glued.
10.
3 x 4 mm balsa belts are glued to underside and upside.
Summary of Contents for Starlet 006140
