Jamara Starlet 006140, Instruction

Page: 3 / 20

3
General Information
As the company JAMARA e. K. has no influence over the use, main -
tenance or conditions under which our products will operate, we
accept no responsibility for any damage caused be it of a physical,
financial or theoretical nature. JAMARA e. K. will accept no claim
against it which results directly or indirectly from the operation or
use of ist products.
Your Statutory Rights apply, any claim made against us will be
based solely on the retail price of the product, and limited to the
model only. This will not apply if we are proved to be legally respon -
sible or when gross negligence can be proved.
Attention!
In some countries it is a legal requirement to carry third par-
ty indemnity insurance when operating a radio controlled
model. Please ask your local dealer, governing body or your
insurance company for details.
Attention!
Switch the transmitter on first then the model. When you
are finisished first switch off the model then the transmitter..
Technical data
Wing Span
~ 1080 mm
Weight
~ 650 - 750 g
Servos
4 x 9 g
Battery LiPo 1800mAh 3N
No responsibility is taken for the cor-
rectness of this information. Subject to
change without prior notice. Errors and
omissions excepted.
Box contents
• Model
• Undercarriage
• Accessories
• Instructions
Highlights
• Laser cut kit
• Ideal to have with you at all times
• Prepared for retracts
• Aileron, elevator, vertical fin and throttle
• Fuselage made of balsa and plywood
• Wings made of wood in rib construction
1.
Mount the undercarriage support.
3.
… and glued together.
2.
The undercarriage wire support is doubled-layered as shown…
4.
Undercarriage support and fuselage side peices are jointed and
aligned in a right angle.