Jamara BD-5, Instruction, Page: 7 / 16

7
23. Fuselage cover on the underside of the cockpit. 24. Rudder
25. Elevator
27. a) Push the elevator right into the „V“.
b) Insert the ply-rings from the top, turn and glue to
fuselage side.
c) The vertical fin should be able to be moved up and down
but not to the back.
26. As a pivot, a 4 mm aluminum rod is fitted with a plywood
control horn (2 x 1.5 mm) with 5min. Epoxy. The rudder horn
is vertical to the fin. Fill the groove, completely with rod and
resin.
28. So side movement is avoided the large ply-rings are now put
into place. These are only glued to the vertical fin from the
outside.