Jamara 006143, Instruction

Page: 12 / 28

12
Use glue to secure the F26 on the center part of the gear mount.
Close view of the round edges R3.
Completion of the fuselage. Please note when hold the fuselage,
it is better to hold the sides avoiding the trips on the tail.
Use glue to secure the F24 inside for reinforcing the gear mount.
Use sanding paper to trim the parts on the top of head fuselage.
Use sanding paper to trim the edges into round edges on the
bottom of the tail fuselage..
Try to fit the F27 inside the fuselage with the Tee nut face up
-
ward. Use instant glue to secure the F27 in place.
Use sandingpaper to trim the sides of the fuselage.
Close view of the round edges (R3).
Drop some instant glue on two sides of F27 and spread some AB
glue on them for better securing.
Use sanding paper to trim the edges of the bottom into round
edges (R3); also trim the uneven parts on the gear mount and
bottom cover.
Use hobby knife to cut the hinge hole on the center of the tail.
Use and instant glue to secure the F25 on the bottom of the
head fuselage.
Use glue to secure F23 inside the F6 (firewall) for reinforcement. Move the F23 to the top and make sure the reinforcement is
strong enough. It is also workable to use AB glue for securing,
but it will add some weight and won‘t allow any mistake during
gluing.
FUSELAGE ASSEMBLY