12
13
Pre-fly arrangement
Ready to fly
Fly the chopper
1. The fly requires a warm weather with wind.
~ Do not fly in extremely bad weathers such as temperature higher than 40°C/113°F or lower than 0°C/0° F.
The overheated and over-coll conditions have bad effect on fly and result in helicopter's damage
~ Do not fly in stron winds. It can limit the helicopter's fly and confuse your control.
Flying in strong winds,the chopper will be missing or cause damage.
~ Do not fly in such weather conditions like strong thunder, flashing lighting, rainstorm, ice strom, heavy snow. etc.
2. It comes ready to fly the chopper over the lawn. Be sure fly area is far away from crowd, animals, trees,
tall buildings, high-voltage cables etc.
1. Pull out the controller's antenna
2. Turn on the controller's power switch, red LED on it brightens
3. Connect battery to the jack of circuit board, put the head cover back
turn on the chopper's power switch
put it onto the open ground
4. Leave the controller to the chopper at least 5 meters far away
5. Confirm that fly area far away from any obstacles,
then pilot your chopper.
Increase throttle stick, main rotor span revolves faster an the chopper rises up.
Pull down throttle stick, main rotor span's rotating speed comes down and the chopper falls.
Turn direction control stick to the left, tail rotor span rotates slowly an the chopper yaw its nos to the left.
Turn direction control stick to the right, tail rotor span revolves faster and the chopper yaw its nose to the right.
This following shows you each operation on the remote controller and what the helicopter's corresponding action is.
Summary of Contents for PATRIOT
Page 18: ...Notizen Notice 18...
Page 19: ...Notizen Notice 19...