Certificate of Conformity
Certificate of conformity and use in accordance with the FTEG.
“Jamara Modeltechnik hereby declare that this model, the
Patriot, complies with the rules and regulations as laid down in
the EU directive 1995/5/EG”
The transmitter and receiver included with this model, Patriot,
conform to the R&TTE regulations.
Questions regarding the conformity of this model should be
directed to:
Jamara Modelltechnik; Am Lauerbühl 5, D-88317 Aichstetten;
Fax +49 (0) 7565/9412-23; [email protected]
Or directly from your dealer.
More information:
www.jamara.de - Downloads - Konformitätserklärung
RC registration regulations:
Before using the RC transmitter check that it complies to the
regulations in your country.
If you have any questions please contact our service centre or
your local dealer. More details you will find in the Jamara
catalogue 07 site 138-139.
Disposal information:
Please care for a environmental correct and legal way of
disposing the batteries and/or accus. Please, only throw
away empty accus into the collect-boxes in your local shops
or commune. (Normally discharge the flying)accus, when the
model stops
Please care for a environmental correct and legal way
of disposing the electronic parts. Please, only throw
away empty parts into the collect-boxes in your local
shops or Commune.
Copter power switch
Copter head cover
Helicopter
RC Antenna
Controller LED
Direction control stick
(left, right)
Controller
pwer switch
Throttle stick
Charger
Important notice:
Full charge to helicopter battery will take about 2 hours long.
Do not over-charge. Keep battery temperature lower than 45°C
When charging it, or it can cause damage.
Take care of battery when it is charging
1. Install antenna cord
Recolve antenna
into adapter clockwise.
2. Insatll batteries
Open the cover of battery cas; insert 8 batteries
(size AA) properly followed by polar indicator.
(Batteries to be purchase).
1. Move off helicopter's head cover.
2. Unplug battery and wires from the circuit board,
and then connect battery with adapter, plug adapter
to 110/220V power outlet.
It begins to charge.
Notes:
Be sure the adapter fir your locar ectrical Power supply
Assemble remote controller
RC
Batteries 8 x size AA
Remote controller
Battery case cover
Attention!
Switch the transmitter on first
then the model.
When you are finisished first
the model then the
transmitter.
switch off
10
11
General information
Charge batteries
GB
GB
Summary of Contents for PATRIOT
Page 18: ...Notizen Notice 18...
Page 19: ...Notizen Notice 19...
