Jam HX-EP925, Instruction Book

Page: 6 / 52

EN 6
LED INDICATORS BASIC FUNCTIONS
TROUBLESHOOTING
1. Remove the earbuds from the charging case.
2. Quickly tap the touch sensor on both earbuds 5 times. This
will disconnect them from your device. Place them back in the
charging case.
3. Forget the JAM TWS ANC earbuds on your Bluetooth
®
device.
Please view the device instruction manual for instructions on
how to forget a device.
4. Turn off Bluetooth on your device.
5. Remove both earbuds from the charging case.
6. Earbuds will automatically go into pairing mode once they are
taken out of the case. The LEDs on the left earbud will flash
red and blue alternatively.
7. Turn on Bluetooth on your device.
8. Pair to “JAM TWS ANC”.
9. Earbuds not disconnecting from your device? The TWS
ANC Earbuds may automatically connect to your device if
put in a charging case that has no battery left. For the best
experience, periodically charge the case to ensure it always
has battery life.
EARBUDS IN CHARGING CASE
Solid red Charging
LED off Charging complete
EARBUDS IN USE
Flashing red and blue
alternatively
Earbuds are in sync with each
other and in pairing mode
Slow flash blue
Earbuds are paired with
device
PORTABLE CHARGING CASE
Flashing white Charging
4 White LEDs on Charging complete
EARBUDS IN MONO USE
Flashing red and blue
alternatively
Earbud is in pairing mode and
searching for a device
Slow flash blue Earbud is paired with device
MUSIC
Play/Pause
Press either touch sensor
button once.
Forward track
If using both earbuds, tap the
touch sensor twice on the right
earbud. If using one earbud,
tap the touch sensor twice of
the earbud in use.
Back track
If using both earbuds, tap the
touch sensor twice on the left
earbud. Note that back track
does not function when using
only one earbud.
CALLS
Pick up a call Tap either touch sensor once
Decline a call
Press and hold either touch
sensor for 2 seconds
End a call Tap either touch sensor twice
Take a second incoming call Tap either touch sensor once
Decline a second incoming
call
Press and hold either touch
sensor for 2 seconds
Swap between 2 calls
Press and hold either touch
sensor for 2 seconds
OTHER
Activate voice assistant
If using both earbuds, tap the
touch sensor on the left earbud
3 times. If using one earbud,
tap the touch sensor 3 times
on the earbud in use.
Turn off earbuds
Press and hold touch sensor
for 4 seconds.
Clear all Bluetooth
connections
Remove earbuds from case.
Tap the touch sensor on either
earbud quickly 5 times. You
will hear the pairing tone and
the LEDs on the left earbud will
flash red and blue. The earbuds
are now ready to pair.
ANC on
If using both earbuds, tap
the touch sensor on the right
earbud 3 times (you will hear a
single tone).
ANC off
If using both earbuds, tap
the touch sensor on the right
earbud 3 times (you will hear
two tones).
NOTE: ANC does not work
when only using one earbud.