SJ �4
CHAPTER
l: INSTALLATION
UNCRATING
Your JAKOBSEN Surface Grinder has been carefully crated for
shipment to insure its accuracy when it reaches your plant.
It is important that the crate is removed carefully so as
not to damage the machine.
2
1) Remove table end guards, coolant tank and any other accesso
ries, which have been attached to the bot om of the packing
case.
2) Inspect the machine for broken or damaged parts.
3) Remove the bolts attaching the machine to the bottom of
the packing-case.
LIFTING INSTRUCTIONS
The machine should only be lifted in a manner illustrated below.
Use two rods 1 3/4" diameter, one 1300 mm (51") long and the
other 1100 mm (43"), and two straps approx. 6 m (20 ft) long.
use padding to
protect pa,nted ·
surfaces
wooden bloc
DO NOT LIFT OR MOVE THE MACHINE
BY THE SADDLE OR TABLE
wire
09 5-13x6000
�8'.'.... V,2"x20feet
045x1300
9
1 ¾
This is the correct method of lifting the grinder
