EN Camera Series
26
Connectors and Cables
Camera Link Connector (continued)
Pin #
Description
I/O Pin
#
Description
I/O
7
Ethernet C- (spare)
-
20
Test point
Out
8
Ethernet B-
In
21
Trigger Input
Out
9
Ethernet B+
In
22
LC TxD (TTL)
In
10
GND (Digital)
Out
23
LC RxD (TTL)
In
11
Flash Strobe Output
Out
24
LC DIR Control (TTL)
In
12
Flash Status Input
In
25
Ethernet D- (Spare)
-
13
IO Status Change
In
26
Ethernet A+
Out
5.1.3
10/100 BaseT Ethernet
Table 4
10/100 BaseT Ethernet Pinout Configuration
10/100 BaseT Ethernet Pinout Configuration
1
Ethernet TxD A+
5
N/C
2
Ethernet TxD A-
6
Ethernet RxD B-
3
Ethernet RxD B+
7
N/C
4 N/C
8 N/C
5.2
RS-232 Communication Cable
Figure 13.
Serial Communications Cable RS-232B-12 (
JAI Inc. part number: 310 132 19
)
The RS-232B-12 interface cable is used to debug the PowerPC processor. This debug port is useful
when the network is down and RS-232 is the only choice to connect with the EN camera. See Section
3.6.3 on page 24 and Section 4.7 on page 31 for detailed information on how to use the debug
PowerPC port.
Note: Please make sure not to “hot” plug this cable into the camera (i.e. Plugging in while camera is
on), unless your laptop or desktop PC is properly grounded. A PC with a floating ground can
damage the internal circuit of the EN camera or your PC’s serial port as soon as the debug
(RS-232B-12) cable is connected.
Summary of Contents for TS-1327EN Series
