![background image](http://html1.mh-extra.com/html/jai/spark-sp-5000m-ge2/spark-sp-5000m-ge2_user-manual_3229082083.webp)
SP-5000M-GE2 / SP-5000C-GE2
- 81 -
Gain Auto Max:
The maximum value of GainAuto control range can be set
Gain Auto Min:
The minimum value of GainAuto control range can be set
ALC Reference:
The reference level of Gain Auto control can be set (Common
with ExposureAuto)
ALC Area Type
:
The area for exposure control can be set(common with
Exposure Auto
)
ALC Customer Area Selector: Select the exposure area from 16 choices (4x4)
ALC Area Enable: This can Enable or Disable the area selected by ALC
Fig.45
ALC Area Type
Fig.46 ALC Custom Area
selector
8.2.5 Balance White Auto
This is a function to achieve auto white balance by using R and B gain.
There are three operations.
OFF:
Manual operation
Once:
Only when this operation is set, the auto white balance is executed.
Continuous:
The auto white balance is continuously executed.
AWB Area Type
:
The control area of BALANCE WHITE AUTO can be set.
AWB Customer Area Selector: One of 16 (4x4) AWB setting areas can be selected.
AWB Area Enable : Set Enable or Disable for the area selected by ALC Custom Area Selector
Note: The figures for AWB Area Type and AWB Custom Area Selector are the same as ALC.
8.3. LUT
This function can be used to convert the input to the desired output characteristics.
The Look-Up Table (LUT) has 256 points for setup. The output level can be created by multiplying
the gain data by the input level.
8.3.1 LUT Enable
Can be selected from OFF, Gamma or LUT table.
Row0
Row1
Row2
Row3
Column 0 Column 1 Column 2 Column 3
Half Width
Half Height
Half Width and Half Height
All