JAI SP-12401C-USB, User Manual

Page: 65 / 77

SP-12401M-USB/SP-12401C-USB
— 65 —
Setting range Default value Description
Configure settings for JAI white blemish
correction.
True, False True Enable/disable blemish correction.
ー ー Execute blemish detection.
This command can not be executed under
the following conditions.
・When no image is output
・Outputting TestPattern
・In Sequencer mode
・In Overlap MultiRoi mode
・In single ROI mode
ー ー Save the location information of detected
blemishes.
1 〜 100 10 Set the blemish detection threshold.
1 〜 800 1 Select the index for the target blemish
coordinates
(BlemishDataPosition X/Y).
BlemishCOmpensationPositionX SP-12401M-USB
-1〜4111
SP-12401C-USB
-1〜4087
-1 Display the X coordinate (horizontal pixel
position) of the target blemish selected in
[BlemishCompensationIndex]. You can also
manually enter the X coordinate of the
blemish you want to correct.
BlemishCOmpensationPositionY SP-12401M-USB
-1〜3007
SP-12401C-USB
-1〜2999
-1 Display the Y coordinate (vertical pixel
position) of the target blemish selected in
[BlemishCompensationIndex]. You can also
manually enter the Y coordinate of the
blemish you want to correct.
BlemishCOmpensationDataClea
r ー ー Delete detected or specified blemish
information selected in
[BlemishCompensationIndex].
0 〜 800 0 Display the number of target blemishes.
Item
BlemishStore
BlemishDetect
BlemishEnable
BlemishCompensationNumber
BlemishCompensationIndex
BlemishDetectThreshold
q）JAICUstomControlBlemish