— 15 —
SP-12000M-CXP4 / SP-12000C-CXP4
1
Lens
F-mount lenses can be used.
Caution
The maximum performance of the camera may not be realized depending on the lens.
Note
The following formula can be used to estimate the focal length.
focal length = WD / (1 + W/w)
WD: Working distance (distance between lens and object)
W: Width of object
w: Width of sensor (18.16 mm on this camera)
2
Direct connection (or MP-42 tripod adapter plate)
When mounting the camera directly to a wall or other structural system, use screws that match the
camera locking screw holes on the camera. (M3, 5 mm)
Use the supplied screws to attach the tripod adapter plate.
Caution
For heavy lenses, be sure to support the lens itself. Do not use configurations in which its weight is supported
by the camera.
3
CXP cables
Connect the CXP cables to the CXP connectors on the camera and the frame grabber board.
•
The number of cables you can connect varies depending on the number of connectors on your
frame grabber board (1, 2, or 4).
•
Be sure to connect each cable to matching connector numbers on the camera and the frame
grabber board.
•
Refer to the specifications of the cable for details on its bend radius.
4
CXP frame grabber board
Refer to the instruction manual of the CXP frame grabber board, and configure settings on the
computer as necessary.
5
Computer
Use a computer that meets the following requirements.
Operating system (OS):
Microsoft Windows 7/8 32-bit/64-bit edition
CPU:
Intel Core i5 or higher
Memory:
Windows 7/8 32-bit edition: DDR3, 4 GB or higher
Windows 7/8 64-bit edition: DDR3, 8 GB or higher
Graphics card:
PCI-Express 3.0 or higher
6
DC IN / trigger IN connection cable
7
AC adapter (power supply)
Connect the AC adapter and the round connector of the connection cable to the DC IN / trigger IN
connector on the camera.
