manualshive.com logo in svg

JAI RM-4200CL, User Manual

Introducing the JAI RM-4200CL User Manual - your comprehensive guide to unlocking the full potential of this cutting-edge product. This manual is available for free download at our website, ensuring easy access and hassle-free assimilation of all essential information. Enhance your user experience with this invaluable resource today!

Share
Download
background image

RM/TM-4200CL Series 

 

 

 

 

 

24

 

 

Control Software

 

 
 

 
 

4

 

Control Software Installation and Use  

4.1

 

Introduction 

The Dual-Tap AccuPiXEL series cameras are high-resolution, progressive scan cameras with JAI proprietary LUT 
control and other excellent features. The software for these cameras was developed to function as standard 

software for the entire Dual-Tap AccuPiXEL series, and can open either the RS- 232 serial port (COM) or Camera 
Link. Camera Link users must physically install the Camera Link frame grabber board into the PC to which the 

camera is connected. They must also install the Camera Link API (clserXXX.dll) software. These cameras are 
specially designed to capture images in progressive scan (non-interlace) format, producing a full frame of 

electronic shutter images, as well as normal images. 

Although this software works with all AccuPiXEL cameras, the interface for the RM-4200CL series appears 
different from other cameras compatible with this same software, and has various capabilities, depending on 
the camera model the software is accessing. The 4200CL series includes the RM-4200CL, TM-4200CL 

(monochrome), RMC-4200CL and TMC-4200CL. The RM-4200CL series software is therefore, specifically 
documented in this section 

4.2

 

Software Installation 

Following are the instructions to install the Dual-Tap AccuPiXEL series camera-control software on a PC. 

4.2.1

 

Before Installing the Dual-Tap AccuPiXEL Series Camera-Control Software 

Please note the following requirements. 

•

 

Your computer must be running Microsoft Windows NT 4.0, Windows 2000, or Windows XP. 

•

 

The software requires one available communication port that is not in conflict with other peripherals such 
as the mouse or modem. 

•

 

Installation of the software requires 2.4 MB of free space in your PC hard disk. 

4.2.2

 

Installing the Software 

To install the Dual-Tap AccuPiXEL series camera-control software, obtain the software from the JAI web site 
and run “Setup.exe.” The installer will direct you to install the application code. 

If dual tap software is already installed on your computer, uninstall the software using the steps in the 
Uninstall section. 

Note:  The link to the frame grabber must be configured after the new software installation. The program asks 

for the location. 

5.

 

To obtain the Dual Tap software visit the JAI, Inc. web site at http://www.jai.com 

6.

 

Hover over the Camera Solutions label in the top menu bar and select “Support & downloads > Downloads” 
from the drop-down menus that appear underneath  

7.

 

Scroll through the list to locate any RM-4200CL series camera (list is organized by scan type and color) 

8.

 

In the Software download column (far right) click the Dual-tap software listing 

Note:   The latest version of Dual-Tap AccuPiXEL software will be listed. This manual uses v2.7.0 in its examples. 

If a later version is downloaded, some of the screens may vary slightly from those shown in the manual.  

9.

 

Select either 

Open 

or 

Save 

on the install dialog box 

Summary of Contents for RM-4200CL





























































Reviews:

No comments

Related manuals for RM-4200CL

Ziginte K900 User Manual preview
K900
Brand: Ziginte Pages: 18
Panasonic WV-CP500 series Specification preview
WV-CP500 series
Brand: Panasonic Pages: 2
Samsung SCC-A2013P Manual preview
SCC-A2013P
Brand: Samsung Pages: 40
C-TEC EACIE User Manual & Log Book preview
EACIE
Brand: C-TEC Pages: 10
Eaton XB12 Technical Manual preview
XB12
Brand: Eaton Pages: 23
Federal Signal Corporation Pathway Installation And Maintenance Instructions Manual preview
Pathway
Brand: Federal Signal Corporation Pages: 32
Ansel AW-111 Series User Manual preview
AW-111 Series
Brand: Ansel Pages: 84
Kodak 8461444 - Max Flash Camera One Time Use Setup Manual preview
8461444 - Max Flash Camera One Time Use
Brand: Kodak Pages: 2
Abus TVIP52500 User Manual preview
TVIP52500
Brand: Abus Pages: 311
Olympia Protect 5080 Operating Instructions Manual preview
Protect 5080
Brand: Olympia Pages: 40
IDTECK LX006 User Manual preview
LX006
Brand: IDTECK Pages: 57
Q-See QCN8025Z Quick Installation Manual preview
QCN8025Z
Brand: Q-See Pages: 2
Elmes Electronic PTX50 Quick Manual preview
PTX50
Brand: Elmes Electronic Pages: 2
SecurityMan SM-703DT Specifications preview
SM-703DT
Brand: SecurityMan Pages: 2
Temper 0775869 Manual preview
0775869
Brand: Temper Pages: 44
DiSS KE-8000MX Service Manual preview
KE-8000MX
Brand: DiSS Pages: 30
Eyeris ERB-L747N Installation And Operating Instruction Manual preview
ERB-L747N
Brand: Eyeris Pages: 10
Zircon ZIRCONLC1 Installation, Operating, & Maintenance Instructions preview
ZIRCONLC1
Brand: Zircon Pages: 8

Brands by name

Popular brands

Load more brands