— 6 —
1RWHVRQFDEOHFRQILJXUDWLRQV
The presence of lighting equipment and television receivers nearby may result in video and audio
noise. In such cases, change the cable configurations or placement.
1RWHVRQ/$1FDEOHFRQQHFWLRQ
Secure the locking screws on the connector manually, and do not use a
driver. Do not secure the screws too tightly. Doing so may wear down the
screw threads on the camera. (Tightening torque: 0.147 Nm or less)
1RWHVRQDWWDFKLQJWKHOHQV
$YRLGLQJGXVWSDUWLFOHV
When attaching the lens to the camera, stray dust and other particles may adhere to the sensor
surface and rear surface of the lens. Be careful of the following when attaching the lens.
• Work in a clean environment.
• Do not remove the caps from the camera and lens until immediately before you attach the lens.
• To prevent dust from adhering to surfaces, point the camera and lens downward and do not allow the
lens surface to come into contact with your hands or other objects.
• Always use a blower brush to remove any dust that adheres.
Never use your hands or cloth, blow with your mouth, or use other methods to remove dust.
3KHQRPHQDVSHFLILFWR&026LPDJHVHQVRUV
The following phenomena are known to occur on cameras equipped with CMOS image sensors. These
do not indicate malfunctions.
•
Aliasing
When shooting straight lines, stripes, and similar patterns, vertical aliasing (zigzag distortion) may
appear on the monitor.
•
Blooming
When the camera is pointed at scenes containing very bright areas or strong light sources, some
pixels on the CMOS image sensor may accumulate more than the maximum charge allowed, causing
the excess charge to overflow into the surrounding pixels. While this "blooming" affects image quality,
it does not affect the operation of the camera.
•
Fixed pattern noise
When shooting dark objects in high-temperature conditions, fixed pattern noise may occur
throughout the entire video monitor screen.
•
Defective pixels
Defective pixels (white and black pixels) of the CMOS image sensor are minimized at the factory
according to shipping standards. However, as this phenomenon can be affected by the ambient
temperature, camera settings (e.g., high sensitivity and long exposure), and other factors, be sure to
operate within the camera’s specified operating environment.
1RWHVRQH[SRUWDWLRQ
When exporting this product, please follow the export regulations of your country or region.
Secure manually.
Do not secure too tightly.
8VDJH3UHFDXWLRQV
GO-5101M-PGE / GO-5101C-PGE
