JAI GO-5100M-PGE, User Manual

Page: 78 / 108

GO-5100MC-PGE | GO-5101MC-PGE | User Manual (Ver. 2.0) Settings List
- 78 -
Settings List
This chapter lists the feature properties.
DeviceControl
Display/configure information related to the device.
Device Control Item Setting Range Default Description
Device Vendor Name - “JAI Corporation” Display the manufacturer name.
Device Model Name - - Display the model name.
Device Manufacturer Info - "See the possibilities" Display the manufacturer information.
Device Version - - Display the hardware version.
Device Firmware Version - - Display the firmware version.
Device Serial Number - - Display the device ID.
Device User ID Any - Set the user ID for the camera.
Device Temperature - - Display the internal temperature (°C) of the camera.
Device Reset - - Reset the device.
ImageFormatControl
Configure image format settings.
Note: Settings that can only be configured when image acquisition on the camera is stopped.
Image Format
Control Item
Setting Range Default Description
Sensor Width 2464 2464 Display the maximum image width.
Sensor Height 2056 2056 Display the maximum image height.
Sensor Digitization
Taps
12 Bit 12 Bit Displays the digital tones output from the sensor.
Width Max 2464 2464 Display the maximum image width.
Height Max 2056 2056 Display the maximum image height.
Width
16(8)* ~ 2464(1232)*
*When Binning = 2, the value
in "( )" is applicable.
2464
Set the image width.
Related Topic: ROI (Region of Interest) Settings
Height
4 ~ 2056 (1028)*
*When Binning = 2, the value
in "( )" is applicable.
2056 Set the image height.