JAI EN Series Cameras TS(C)-1327EN, Owner'S Manual

Page: 44 / 68

EN Camera Series
44 Camera Features
Table 6 EN Exposure Times
TS(C)-2030EN/TS(C)-2076EN
(55.0
μ
s x H + 28.7
μ
s)
TS(C)-1327EN
(633
μ
s x H + 5.1
μ
s)
TS(C)-4032EN
(24
μ
s x H)
Shutter
Dial
Exposure
Time
(H)
Exposure
Time ( μ s)
Exposure
Time
(H)
Exposure
Time ( μ s)
Exposure
Time
(H)
Exposure
Time ( μ s)
1 1 83.7 1/2 36.8 1 24
2 2 138.7 1 68.4 1.5 36
3 3 193.7 2 131.7 2 48
4 4 248.7 4 258.3 3 72
5 6 358.7 6 384.9 4 96
6 8 468.7 8 511.5 6 144
7 9 523.7 9 574.8 8 192
8 10 578.7 10 638.1 12 288
9 11 633.7 11 701.4 16 384
A 13 743.7 13 828.0 21 504
B 15 853.7 15 954.6 26 624
C 17 963.7 17 1081.2 36 864
D 18 1,018.7 18 1144.5 44 1056
E 126 6,958.7 126 7980.9 64 1536
F 262 14,438.7 262 16,589.7 84 2016
0 525 28,903.7 1040 65,837.1 1365 32,760
When the EN camera is controlled by light sensor, user can monitor the shutter value in EN setup
software by accessing "Camera Shutter" status register (Address = 233). Note that this Shutter value
is dial number and not actual exposure time, (left side of the table above).
User needs to set appropriate "ADR Shutter Max" and "ADR Shutter Min" config registers (Address =53
and 58 respectively) to limit exposure time. In daytime, "ADR Shutter Min" limits the shortest
exposure time (or faster shutter speed). In night time, "ADR Shutter Max" limits the longest exposure
time (or slowest shutter speed). The factory default settings of "ADR Shutter Min" and "ADR Shutter
Max" are as follows: Factory Default Settings of the ADR Shutter Min. and Max.
Table 7 Factory Default Settings of the ADR Shutter Min. and Max.
TS(C)-2030EN/TS-2076EN TS(C)-1327EN TS(C)-4032EN
BW Color BW Color BW Color
ADR shutter Min Dial=1 (1H) Dial=3 (3H) Dial=1 (1/2H) Dial=3 (2H) Dial=1 (1H) Dial=5 (4H)
ADR Shutter Max Dial=7 (9H) Dial=11 (15H) Dial=6 (8H) Dial=11 (15H) Dial=10 (21H) Dial=12 (36H)