![background image](http://html1.mh-extra.com/html/jai/elite-el-2800c-ge2/elite-el-2800c-ge2_user-manual_631432059.webp)
EL-2800M-GE2 / EL-2800C-GE2
- 57 -
7.1.1.3 Continuous mode
In this mode, when the AcquisitionStart command is set, the image is continuously output at the
current frame rate. This is the default setting for the EL-2800M-GE2 and EL-2800C-GE2.
1) AcquisitionStart command is input
2) AcquisitionTriggerWait becomes effective
3) AcquisitionActive becomes
“
TRUE”
4) Images begin outputting continuously
5) AcquisitionStop command is sent
6) AcquisitionActive becomes
“
FALSE”. At this moment, the output stops.
However, if AcqusitionStop command is initiated during image output period,
AcqusitionActive becomes “FALSE” (stop capturing) after image output is completed.
The following diagrams show the Continuous Timing relationships.
Conditions:
Acquisition mode:
Continuous
Trigger selector:
Acquisition Start
Trigger mode:
OFF
Fig.32 Continuous Timing
FVAL(Sensor Read
out)
Acquisition Trigger
Wait
Frame Trigger Wait
Acquisition
Active
Exposure
Active
Frame
Active
(Sensor
Exposure)
(Stream
Active)
Acquisition
Status
Output Signals
Acquisition Trigger Wait = L
Frame Trigger Wait =L
Acquisition
Active
Frame
Active
Exposure
Active
FALSE
TRUE
FALS
E
FALSE
TRUE
FALSE
TRUE
FALS
E
FALSE
FALSE
Acquisition Start
command
FALS
E
TRUE
FALS
E
Acquisition Stop
command
TRUE
FALSE