![background image](http://html1.mh-extra.com/html/jai/elite-el-2800c-ge2/elite-el-2800c-ge2_user-manual_631432035.webp)
EL-2800M-GE2 / EL-2800C-GE2
- 33 -
5.4.1 Line Selector
In the Line Selector, the following input and output signals can be assigned.
Table – 7 Line selector
Note: Line 8 and 9 are available if AUX Type 3 is used for AUX connector (option).
5.4.2 Line source
Line source signal is selected against the dedicated line selected in the line selector.
Table – 8 Line source
Line Selector item
Description
Line 2 OPT Out1
Opt 1 output from 12P connector #9/10 pin located on the rear panel
Line 3 OPT Out2
Opt 2 output from 12P connector #7/8 pins located on the rear panel
Line 8 TTL 2 Out
TTL 2 output from
“AUX” HIROSE 10-Pin connector #1 pin
Line 9 TTL 3 Out
TTL 3 output from
“AUX” HIROSE 10-Pin connector #2 pin
NAND 0 In 1
NAND first gate, No. 1 input on GPIO
NAND 0 In 2
NAND first gate, No. 2 input on GPIO
NAND 1 In 1
NAND second gate, No. 1 input on GPIO
NAND 1 in 2
NAND second gate, No. 2 input on GPIO
Line Source item
Description
Low
Connect Low Level signal to line item selected in Line Selector,
Default setting
High
Connect High Level signal to line item selected in Line Selector
Frame Trigger Wait
Connect Frame Trigger Wait signal to line item selected in Line Selector
Frame Active
Connect Frame Active signal to line item selected in Line Selector
Acquisition Trigger Wait Connect Acquisition Trigger Wait signal to line item selected in Line Selector
Acquisition Active
Connect Acquisition Active signal to line item selected in Line Selector
Exposure Active
Connect Exposure Active signal to line item selected in Line Selector
FVAL
Connect FVAL signal to line item selected in Line Selector
LVAL
Connect LVAL signal to line item selected in Line Selector
PulseGenerator0 Out
Connect Pulse Generator 0 signal to line item selected in Line Selector
PulseGenerator1 Out
Connect Pulse Generator 1 signal to line item selected in Line Selector
PulseGenerator2 Out
Connect Pulse Generator 2 signal to line item selected in Line Selector
PulseGenerator3 Out
Connect Pulse Generator 3 signal to line item selected in Line Selector
Line 5 Opt In 1
Connect Opt In 1 signal to line 5 in Line Selector
Line 6 Opt In 2
Connect Opt In 2 signal to line 6 in Line Selector
NAND 0 Out
Connect NAND 0 signal to line item selected in Line Selector
NAND 1 Out
Connect NAND 1 signal to line item selected in Line Selector
Line 10
TTL 2 In
Connect TTL 2 In signal to Line 10
Line 11
LVDS 1 In
Connect LVDS 1 In signal to Line 11
Note: As for LVAL, some line items cannot be connected. Refer to
“
5.4.7.2 GPIO matrix table
”