AP-1600T-USB | AP-3200T-USB | User Manual (Ver. 2.0)
Main Functions
- 31 -
GPIO (Digital Input/Output Settings)
Related Setting Items:
The camera is equipped with GPIO (general-purpose input/output) functions for generating and using
combinations of triggers and other necessary signals within the camera and of signals output from the
camera to the system such as those used for lighting equipment control.
These signals can be used as triggers and other necessary signals within the camera or as signals
output from the camera to the system, such as those used for lighting equipment control.
Note:
See "
DC IN / Trigger IN Connector (12-pin Round)
" for recommended external circuit
examples.
You can check the status of each digital I/O as shown in the table below.
Line Selector
Line Source
Line Inverter
Line Status*
Line Mode
Line Format
Line Status All**
Line1 - TTL Out1
User Specified
True/False
True/False
Output
TTL
bit0
Line2 - OptOut1
User Specified
True/False
True/False
Output
OptoCoupled
bit1
LIne5 - Opt In 1
Not Available
Not Available
True/False
Input
OptoCoupled
bit4
Line6 - Op In 2
Not Available
Not Available
True/False
Input
OptoCoupled
bit5
Time Stamp
Reset
User Specified
True/False
True/False
Internal
Connection
Internal Signal
bit11
Nand0In1
User Specified
True/False
False (Fixed)
Input
Internal Signal
bit12
Nand0In2
User Specified
True/False
False (Fixed)
Input
Internal Signal
bit13
Nand1In1
User Specified
True/False
False (Fixed)
Input
Internal Signal
bit14
Nand1In2
User Specified
True/False
False (Fixed)
Input
Internal Signal
bit15
Notes:
l
*Line Status: "Low" signal level is indicated by
False
, and "High" signal level is indicated by
True
.
l
**Line Status All: The current status of the Line signal is indicated by the above bit field.
