JAI Apex Series User Manual Download

Page: 17 / 113

AP-1600T-USB | AP-3200T-USB | User Manual (Ver. 2.0)

Preparation

- 17 -

Preparation

Read this section to learn how the camera connects to devices and accessories. The preparation
process is described below.

Step 1: Install the Software (First Time Only)

Install the software for configuring and controlling the camera (eBUS SDK for JAI) on the computer.

Step 2: Connect Devices

Connect the lens, cables, AC adapter, computer, and other devices.

Step 3: Verify Camera Operation

Verify whether the camera is turned on and ready for use.

Step 4: Verify the Connection between the Camera and PC

Verify whether the camera is properly recognized via Control Tool.

Step 5: Change the Camera Settings

Refer to the procedure for changing the output format setting as an example and change various
settings as necessary.

Step 6: Adjust the Image Quality

Refer to the procedures for adjusting the gain and black level as examples and adjust the image quality.

Step 7: Save the Settings

Save the current setting configurations in user memory.

Step 1: Install the Software (First Time Only)

When using the camera for the first time, install the software for configuring and controlling the camera
(eBUS SDK for JAI) on the computer.

Notes:

When you install eBUS SDK for JAI, eBUS Player for JAI will also be installed.

For the operating system (OS) requirements for eBUS SDK for JAI, see the JAI Camera Software
page (

https://www.jai.com/support-software/jai-software

) or eBUS Player User Guide.

1. Download the eBUS SDK for JAI from the JAI website (

https://www.jai.com/support-software/jai-

software

2. Install eBUS SDK for JAI on the computer.

Summary of Contents for Apex Series


















































































































Search results

Summary of Contents for Apex Series

Reviews:

Related manuals for Apex Series

Brands by name

Popular brands

JAI Apex Series, User Manual

Search results

Summary of Contents for Apex Series

Reviews:

Related manuals for Apex Series

Brands by name

Popular brands