AP-1600T-USB | AP-3200T-USB | User Manual (Ver. 2.0)
Preparation
- 24 -
Step 5: Change the Camera Settings
Related Setting Items:
This section explains how to change settings by describing the procedure for changing the output
format as an example.
Configure the Output Format
Configure the size, position, and pixel format of the images to be acquired. The factory settings are as
follows. Change the settings as necessary.
Factory Default Values
Item
AP-1600T-USB
AP-3200T-USB
ImageFormatControl
Width
1456
2064
Height
1088
1544
OffsetX (horizontal position)
0
0
OffsetY (vertical position)
0
0
PixelFormat
BGR8
BGR8
Note:
You can specify the image acquisition area. For details, see “
”.
Example: Change the Width setting (ImageFormatControl)
1. By selecting the item "Width", you can change the value as shown below.
Note:
Depending on the setting item, you need to change visibility. Please switch visibility
(Beginner / Expert / Guru) as necessary.
