JAI AP-1600T-PMCL, User Manual, Page: 42 / 145

AP-1600T-PMCL | AP-3200T-PMCL | User Manual (Ver. 2.0) Main Functions
- 42 -
Exposure Mode
Related Setting Items: AcquisitionControl
The following exposure modes are available on the camera.
Exposure
Mode
Description
Off Exposure control is not performed (free-running operation).
Timed
Mode in which control is performed using exposure time. Acquire images using an exposure time
configured beforehand on an external trigger.
Trigger
Width
Mode in which control of the exposure time is performed using the pulse width of the trigger input
signal. The exposure time will be the same as the pulse width of the trigger input signal. This allows
long exposure.
Notes:
l
The settings for exposure control and triggers are related to each other. Be sure to configure
the settings described in “
Trigger Control ”.
l
When ExposureTimeMode is set to Individual , you can set the exposure times for Red,
Green, and Blue individually. To set the exposure time individually for Red, set
ExposureTimeSelector to Red , and configure the exposure time for Red in
ExposureTime . Similarly, configure the exposure times individually for Green and Blue.
l
When ExposureTimeMode is set to Individual , SequenceExposureTimeCommon will be
disabled. When ExposureTimeMode is set to Common ,
SequencerExposureTimeRed / Green / Blue will be disabled.
Actual Exposure Times
The shortest exposure times that can be configured are as follows.
ExposureMode
Shortest Exposure Time
AP-1600T-PMCL AP-3200T-PMCL
Timed 15.26 μs (8-bit) 14.73 μs
Trigger Width 15.26 μs(8-bit) 14.73 μs