JAI AP-1600T-PMCL, User Manual, Page: 82 / 145

AP-1600T-PMCL | AP-3200T-PMCL | User Manual (Ver. 2.0) Setting List (Feature Properties)
- 82 -
AcquisitionControl
Related Topic: Image Acquisition Controls (Acquisition Control)
Configure image capture settings.
Note: Settings that can only be configured when image acquisition on the camera is stopped.
Acquisition Control
Item
Setting Range Default Description
Acquisition Frame Rate
(Hz)
Related Topic:
Frame Rate
Reference
0.125 ~ -
Set the frame rate as a frequency. (unit: Hz) The
maximum value varies depending on the
TapGeometory and ROI settings.
Trigger Selector
Related Topic:
Trigger Control
Frame Start Frame Start Select the trigger operation.
Trigger Mode Off, On Off Enables/Disables the Trigger mode.
Trigger Software - - Execute a software trigger.
Trigger Source
Low
High
Software
Pulse Generator 0 ~ 3
User Output 0 ~ 3
Line5 - OptIn1
Line6-OptIn2
Line7 - CC1
NAND0 Out
NAND1 Out
Line5 - OptIn1 Select the trigger signal source.
Trigger Activation
Rising Edge
Falling Edge
Rising Edge
Select the polarity of the trigger signal (i.e., location of
signal at which trigger is applied).
Trigger Overlap
Off
Readout
Readout Select the trigger overlap operation.
TriggerDelay (μs) 0 ~ 500000 0 Set the time of exposure start from trigger input.
ExposureModeOption
Off
RCT
Off Set whether to enable RCT mode.