15
**
Note**
Only units with the same
Network Password
will be shown,
please check that first, to make sure they all have the same network
password (Case sensitive).
**Note**
If a Unit shows MAC Address of all 0’s, this unit might not have a
solid connection, or might not connect at all. If this is the case please
contact technical support (
Appendix D
).
**
Note**
If there are Units in your home, that you do not see in this
Network scan, try to unplug all devices, and plug them back in (Only do
this with the Units that you do not view in the network screen, you don’t
have to do this with all units. If the problem persists, try to move the unit
closer to this current unit (adjacent plugs on the same wall socket is most
preferable). If the problem still persists and that unit is still not shown on
the network, then the unit might be defective please contact technical
support (
Appendix D
). Otherwise if you view the unit working, distance
and/or electrical circuit might be the causes.
Setting Up Security on a Local Powerline device
The
Privacy
tab will allow you to change the
Network Password
to the
unit that is currently connected to this computer. This network password
encrypts all data that is sent from this unit using
56-bit data encryption
standard (DES). The DES Encryption is very secure, and very difficult to
crack, therefore your home network is very secure and very difficult to be
breached.
