JAGO FF Europe DUNSH02, Original Instruction Manual

Page: 19 / 31

19
EN
INSTALLATION
INSTALLING THE UNIT ON THE WALL
INSTALLING THE UNIT UNDER KITCHEN ELEMENT
Before installation, make sure the unit is turned off
and unplugged.
The extractor hood should be placed at 65 ~ 75 cm
above the cooking panel for best effect (min. 65 cm
for electric cooker, min. 75 cm for gas cooker)
Drill 2 holes ø 8 mm according with the center distance
of the hole in the back of the hood
Insert the nut into the holes.
Insert the screws into the nuts and tighten them. Put
the extractor hood onto the tightened screws.
Fixate the hood with safety screws that are positioned
on the back of the casting with ø 6mm.
Put the one-way valve into the cooker hood.
Drill four holes ø 6 mm at the bottom of the kitchen
element.
Put the one way valve on the extractor hood and
tighten the hood with enclosed 4 screws.
Note: the extensible pipe is an optional accessory,
it is not supplied.