ENGLISH
19
Chapter 6
Plug It In, Turn It On, And Load It!
1. Unsnap the 3 protective dust caps from the bottle well assembly located
on the top of the dispenser. These caps should not be removed and should be
snapped in place when a well space is not being used.
IF THIS IS THE FIRST USE FOR THE MACHINE, REMOVE ANY ABSORBANT
MATERIALS IN EACH WELL. ALSO REMOVE THE PROTECTIVE CAP ON
THE OUTPUT OF THE FAUCET
2. Plug in the power cord of the machine into a 115VAC, 60 Hz. 15 Amp,
3-pronged power receptacle within 5 feet of the rear of the unit. DO NOT
USE AN EXTENSION CORD OR SURGE SUPPRESSOR.
If the power switch is ON, the built in lighting will be on. If the lighting does
not come on, turn the power switch to the ON position.
3. Unscrew the caps from 3 fresh bottles of Jägermeister and insert the
tapered end of the bottle stoppers as described in Bottle Stopper Insertion
and Removal above. The bottle stoppers are spring actuated and prevent
dispensing until they are inserted into the bottle well assembly.
4. Place each of the Jägermeister bottles on the top of the machine by
inverting the bottle and inserting the barrel end of the bottle stopper
assembly into the bottle well assembly until the collar of the bottle stopper
rests inside the bottle well assembly flange. The Jägermeister flow into the
machine is automatically activated when the bottle stopper is placed correctly
into the bottle well.
THE MACHINE WILL LOAD A TOTAL OF APPROXIMATELY 1½ LITERS
OR ABOUT 53 OUNCES OF JÄGERMEISTER.
5. If the power switch is not in the ON position, place it in the ON position.
Allow 30 minutes for the system to chill down before dispensing shots of
Jägermeister. When the refrigeration switch is in the ON position and the
level indicates F, the refrigeration compressor and the condenser fan will
begin to run within 2 minutes. It is very important that the front and the rear
of the machine is kept free and clean of obstructions. Air is drawn from the
front of the machine through a removable filter and exhausted through the
rear of the machine. Once the machine reaches the factor set temperature,
the refrigeration system will shut off. The refrigeration system will turn
on as need to keep the Jägermeister at the optimum temperature.
