4
Front View
1
2
3 4 5
6
CAMERA CHARACTERISTICS
1. Antenna:
Standard antenna shown receives cell tower signals. Our 5
decibel booster antenna is available as an accessory for operation in low
signal areas.
1
a
. Antenna Seal:
Prevents water from getting into the camera through
the antenna port
(see page 7)
.
2. IR Illuminator:
44 infrared LEDs that illuminate the target area when
camera functions at night.
3. Ambient Light Sensor:
Detects surrounding light to automatically
control day and night camera functions. This sensor also emits a green,
blinking LED when the selector switch is moved to
SETUP.
The LED will
stop blinking within 10 to 20 seconds after the selector switch is moved from
SETUP
to
ON
indicating the camera is operational and active.
4. Camera Lens:
The camera lens has a 52° field of view with no magni
-
fication. This enables users to observe a 20’ field of view measured 15’ from
the lens and a 32’ field of view when measured 21’ from the lens.
5. Microphone:
Picks up the ambient sounds around the camera.
6. PIR Sensor:
Passive Infrared motion detector. Senses the presence of
a moving object which triggers the camera to take a photo or record a video.
7.
Locking Latch:
Secures the camera front housing to the main body
housing while providing a waterproof seal to internal components
.
This manual is intended to guide users through the individual steps to
properly program, operate and maintain the AT&T version of our JAGER
PRO™ M.I.N.E™ and I.C.E.™ Cameras on the data plan.
1a
7
Summary of Contents for M.I.N.E.
Page 1: ...1...