21
Exterior:
1. Inspect the outside of the camera body for any cracks which may cause
water or moisture to damage electronics.
2. Check for condensation in the IR LED bank.
3. Ensure the antenna is not loose, bent, broken or cracked, and the antenna
seal is present.
4. Wipe excess dirt from camera lens with a soft cloth and use a moist cotton
swab with rubbing alcohol to thoroughly clean.
5. Apply even pressure to camera face and main body housing when closing
to ensure proper alignment of waterproof seal.
6. Ensure the latch is tightly securing the camera housing.
7. Clean inside the ambient light sensor port and PIR cover.
8. Inspect the DC and USB port covers for dry rot and damage.
2
3
4
7
7
8
6
8
WARNING! The DC Port plug must be removed before accessing
camera functions. Opening the camera while the external battery is
plugged into the housing port may result in damage to both the camera
and the external battery.
WARNING! Removing screws from internal camera ports will damage
electronic components and void the warranty.
3
Summary of Contents for M.I.N.E.
Page 1: ...1...