44
JAGA N.V. | MICRO CANAL | MANUEL | 12 APRIL 2022, 14:48 | V.02
Fit the final finish and place the inner casing in the outer casing.
Use the control screws to adjust the unit to the desired height.
Place the device on finished floor height .
12
11
Anchoring of the inner housing after fine adjustment .
13
only for continuity: use the supplied connecting pieces to connect
the different units.
14
Connect the flexibles to the coil’s supply and return connections.
15
Remove plug at hydraulic connection.
Use a back-off wrench when fastening
the hydronic connections
